goldenuf.blogg.se

Part 3: How to use MicroPOD II clone for auto key programming At this point, you also have the option to program a second key. The new key key is accepted into the car, and the ignition will now turn on and start the car. Programming of the Ignition FOBIX is now successful. Next select “Miscellaneous Functions,” then “Program Ignition Fobix.” At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.Īfter the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).

This is the module where the key is registered. Select the RFH (Radio Frequency Hub) module. This gives you access to the module list. Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. Part 3: How to use wiTech MicroPod II clone for auto key programming Step 3 install wiTECH_Install_17.04.27.exe Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack: The system may ask you to turn off the software and turn it on for registration again.